Publicación:
INFLUENCE OF THE WOOD QUALITY AND TREATMENT TEMPERATURE ON THE PHYSICAL AND MECHANICAL PROPERTIES OF THERMALLY MODIFIED RADIATE PINE

Vista sencilla de ítem
dc.creatorJOSÉ ABRAHAM TORRES MELLA
dc.creatorVÍCTOR ANDRÉS SEPÚLVEDA VILLARROEL
dc.creatorLINETTE PAOLA SALVO SEPÚLVEDA
dc.creatorCARLOS HERNÁN SALINAS LIRA
dc.creatorRUBÉN ANDRÉS ANANÍAS ABUTER
dc.date2019
dc.date.accessioned2025-01-10T15:11:00Z
dc.date.available2025-01-10T15:11:00Z
dc.date.issued2019
dc.description.abstractIN THIS STUDY, THE EFFECTS OF THE WOOD QUALITY USED FOR THERMAL MODIFICATION ON THE PHYSICAL AND MECHANICAL PROPERTIES OBTAINED AT TWO TREATMENT TEMPERATURES COMMONLY USED AT THE INDUSTRIAL LEVEL WERE EVALUATED IN ORDER TO VALIDATE EXPERIMENTALLY THE PILOT SCALE PROCESS FOR ITS FUTURE INDUSTRIAL SCALING. THE QUALITY OF THE INPUT RADIATA PINE REFERS TO THE PRESENCE OF NATURAL DEFECTS OF WOOD, AS WELL AS THE AMOUNT OF JUVENILE WOOD. SELECTED THERMALLY MODIFIED SAMPLES WERE USED TO MEASURE SOME QUALITY MARKERS (PHYSICAL, MECHANICAL, OPTICAL) AND TO FIND THEIR CORRELATIONS DUE TO QUALITY OR TREATMENT, SO AS TO OBTAIN THE BEST CHARACTERISTICS OF THE HEAT-TREATED PRODUCTS. THE RESULTS INDICATED THAT THE QUALITY OF THE INPUT WOOD WAS ONLY RELEVANT TO THE MILD TREATMENT (190 °C), FINDING AN ACCEPTABLE CORRELATION BETWEEN THE WEIGHT LOSS AND THE QUALITY USED (FIRST QUALITY). AFTER BOTH TREATMENTS, THE ORDER OF ANISOTROPY WAS KEPT AND THE DIMENSIONAL CHANGES WERE SIGNIFICANTLY REDUCED; THUS, THE WEIGHT LOSS DURING TREATMENT DID NOT DRAMATICALLY AFFECT ITS ANATOMICAL STRUCTURE. CLUSTERING THE DATA BY STATISTICAL PROCEDURES WAS POSSIBLE TO OBSERVE THAT SAMPLES OF LOWER QUALITY WERE ORDERED ACCORDING TO THE TREATMENT TEMPERATURE, INDICATING A STRONG INFLUENCE OF THE TREATMENT ON THE PROPERTIES OBTAINED. THE MECHANICAL PROPERTIES REVEALED THAT UP TO 190 °C THE CHEMICAL CHANGES THAT OCCUR ON WOOD AFFECTED POSITIVELY THE VALUES (MOE INCREASED BY ABOUT 15?32% AND MOR SLIGHTLY DECREASED?
dc.formatapplication/pdf
dc.identifier.doi10.1007/s00107-019-01424-9
dc.identifier.issn1436-736X
dc.identifier.issn0018-3768
dc.identifier.urihttps://repositorio.ubiobio.cl/handle/123456789/10814
dc.languagespa
dc.publisherEuropean Journal of Wood and Wood Products
dc.relation.uri10.1007/s00107-019-01424-9
dc.rightsPUBLICADA
dc.titleINFLUENCE OF THE WOOD QUALITY AND TREATMENT TEMPERATURE ON THE PHYSICAL AND MECHANICAL PROPERTIES OF THERMALLY MODIFIED RADIATE PINE
dc.typeARTÍCULO
dspace.entity.typePublication
ubb.EstadoPUBLICADA
ubb.Otra ReparticionDIRECCION DE INVESTIGACION Y CREACION ARTISTICA
ubb.Otra ReparticionDEPARTAMENTO DE INGENIERIA EN MADERAS
ubb.Otra ReparticionDEPARTAMENTO DE INGENIERIA EN MADERAS
ubb.Otra ReparticionDEPARTAMENTO DE INGENIERIA MECANICA
ubb.Otra ReparticionDEPARTAMENTO DE INGENIERIA EN MADERAS
ubb.SedeCONCEPCIÓN
ubb.SedeCONCEPCIÓN
ubb.SedeCONCEPCIÓN
ubb.SedeCONCEPCIÓN
ubb.SedeCONCEPCIÓN
Archivos
Colecciones
Artículos científicos