Publicación:
EXTRUSION OF FOAMED WOOD-PLASTIC COMPOSITES. PART I: PHYSICAL AND MORPHOLOGICAL CHARACTERIZATIN.

Vista sencilla de ítem
dc.creatorWILLIAM ARNOLDO GACITÚA ESCOBAR
dc.creatorALDO AQUILES BALLERINI ARROYO
dc.date2017
dc.date.accessioned2025-01-10T14:56:55Z
dc.date.available2025-01-10T14:56:55Z
dc.date.issued2017
dc.description.abstractINTRODUCTION: THE USE OF WOOD-PLASTIC COMPOSITES (WPCS) HAS BEEN LIMITED DUE TO THEIR LOW IMPACT STRENGTH AND HIGH DENSITY COMPARED TO NATURAL WOOD. OBJECTIVE: TO CHARACTERIZE THE CELLULAR MORPHOLOGY AND DENSITY OF WPCS PREPARED WITH VIRGIN AND RECYCLED POLYETHYLENE, AND PINUS RADIATA WOOD. MATERIALS AND METHODS: THE POLYMER AND THE FOAMED WPCS WERE MANUFACTURED BY AN EXTRUSION PROCESS. THE VIRGIN AND RECYCLED HIGH-DENSITY POLYETHYLENE WAS MIXED SEPARATELY WITH P. RADIATA WOOD. THE PLASTIC/WOOD RATIOS WERE 80/20 AND 70/30, WITH AN ENDOTHERMIC FOAMING AGENT (HYDROCEROL 1700 AT 1 AND 3%), A COUPLING AGENT (LICOCENE 4351), AND A LUBRICATING AGENT (LICOLUB H12) ADDED. RESULTS AND DISCUSSION: THE DENSITY OF VIRGIN POLYMER, WITH 1 AND 3% FOAMING AGENT, WAS REDUCED BY 39 AND 20%, RESPECTIVELY, BUT IN THE RECYCLED POLYMER THE REDUCTION WAS 18 AND 23%, RESPECTIVELY. IN THE FOAMED WPCS, THE REDUCTION WAS LESS THAN 10%. THE FOAMED COMPOSITES HAD SMALLER BUBBLE DIAMETER AND HIGHER CELL DENSITY. THE VOID FRACTION WAS HIGHER IN THE VIRGIN POLYMER AT 3% FOAMING. CONCLUSION: THE USE OF A FOAMING AGENT GAVE BETTER PHYSICAL PROPERTIES TO THE COMPOSITES
dc.formatapplication/pdf
dc.identifier.doi10.5154/r.rchscfa.2016.09.051
dc.identifier.issn2007-4018
dc.identifier.issn2007-3828
dc.identifier.urihttps://repositorio.ubiobio.cl/handle/123456789/9692
dc.languagespa
dc.publisherREVISTA CHAPINGO SERIE CIENCIAS FORESTALES Y DEL AMBIENTE
dc.relation.uri10.5154/r.rchscfa.2016.09.051
dc.rightsPUBLICADA
dc.titleEXTRUSION OF FOAMED WOOD-PLASTIC COMPOSITES. PART I: PHYSICAL AND MORPHOLOGICAL CHARACTERIZATIN.
dc.title.alternativeEXTRUSIÓN DE COMPOSITES ESPUMADOS MADERA-PLÁSTICO. PARTE I: CARACTERIZACIÓN FÍSICA Y MORFOLÓGICA
dc.typeARTÍCULO
dspace.entity.typePublication
ubb.EstadoPUBLICADA
ubb.Otra ReparticionDEPARTAMENTO DE INGENIERIA EN MADERAS
ubb.Otra ReparticionDEPARTAMENTO DE INGENIERIA EN MADERAS
ubb.SedeCONCEPCIÓN
ubb.SedeCONCEPCIÓN
Archivos
Colecciones
Artículos científicos