Publicación: EFFECT OF THE PROCESSING PARAMETERS ON THE POROSITY AND MECHANICAL BEHAVIOR OF TITANIUM SAMPLES WITH BIMODAL MICROSTRUCTURE PRODUCED VIA HOT PRESSING
| dc.creator | CHRISTOPHER GONZALO SALVO MEDALLA | |
| dc.date | 2022 | |
| dc.date.accessioned | 2025-01-10T15:26:35Z | |
| dc.date.available | 2025-01-10T15:26:35Z | |
| dc.date.issued | 2022 | |
| dc.description.abstract | COMMERCIALLY PURE (C.P.) TITANIUM GRADE IV WITH A BIMODAL MICROSTRUCTURE IS A PROMISING MATERIAL FOR BIOMEDICAL IMPLANTS. THE INFLUENCE OF THE PROCESSING PARAMETERS ON THE PHYSICAL, MICROSTRUCTURAL, AND MECHANICAL PROPERTIES WAS INVESTIGATED. THE BIMODAL MICROSTRUCTURE WAS ACHIEVED FROM THE BLENDS OF POWDER PARTICLES WITH DIFFERENT SIZES, WHILE THE POROUS STRUCTURE WAS OBTAINED USING THE SPACE-HOLDER TECHNIQUE (50 VOL.% OF AMMONIUM BICARBONATE). MECHANICALLY MILLED POWDERS (10 AND 20 H) WERE MIXED IN 50 WT.% OR 75 WT.% WITH C.P. TITANIUM. FOUR DIFFERENT MIXTURES OF POWDERS WERE PRECOMPACTED VIA UNIAXIAL COLD PRESSING AT 400 MPA. THEN, THE SPECIMENS WERE SINTERED AT 750 °C VIA HOT PRESSING IN AN ARGON GAS ATMOSPHERE. THE PRESENCE OF A BIMODAL MICROSTRUCTURE, COMPRISED OF SMALL-GRAIN REGIONS SEPARATED BY COARSE-GRAIN ONES, WAS CONFIRMED BY OPTICAL AND SCANNING ELECTRON MICROSCOPIES. THE SAMPLES WITH A BIMODAL MICROSTRUCTURE EXHIBITED AN INCREASE IN THE POROSITY COMPARED WITH THE COMMERCIALLY AVAILABLE PURE TI. IN ADDITION, THE HARDNESS WAS INCREASED WHILE THE YOUNG S MODULUS WAS DECREASED IN THE SPECIMENS WITH 75 WT.% OF THE MILLED POWDERS (20 H). | |
| dc.format | application/pdf | |
| dc.identifier.doi | 10.3390/ma15010136 | |
| dc.identifier.issn | 1996-1944 | |
| dc.identifier.issn | 1996-1944 | |
| dc.identifier.uri | https://repositorio.ubiobio.cl/handle/123456789/12037 | |
| dc.language | spa | |
| dc.publisher | MATERIALS | |
| dc.relation.uri | 10.3390/ma15010136 | |
| dc.rights | PUBLICADA | |
| dc.title | EFFECT OF THE PROCESSING PARAMETERS ON THE POROSITY AND MECHANICAL BEHAVIOR OF TITANIUM SAMPLES WITH BIMODAL MICROSTRUCTURE PRODUCED VIA HOT PRESSING | |
| dc.title.alternative | EFECTO DE LOS PARÁMETROS DE PROCESAMIENTO SOBRE LA POROSIDAD Y EL COMPORTAMIENTO MECÁNICO DE MUESTRAS DE TITANIO CON MICROESTRUCTURA BIMODAL PRODUCIDA MEDIANTE PRENSADO EN CALIENTE | |
| dc.type | ARTÍCULO | |
| dspace.entity.type | Publication | |
| ubb.Estado | PUBLICADA | |
| ubb.Otra Reparticion | DEPARTAMENTO DE INGENIERIA MECANICA | |
| ubb.Sede | CONCEPCIÓN |
